1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 236Get this manual
Assemble the tools using the long spacer, PIN 339753, to install the upper pinion bearingPress against the bearing's lettered side until washer contacts long spacer
To ensure accurate bearing location, washer must be flat and screw must be tight
r;] 7Using OMC Bearing Installer, PIN 319931, and an arbor
press, install the driveshaft bearing into the bearing sleeve with the lettered side against the toolf71 8Oil the bearing sleeve and install with the bearing into the gearcase using OMC Bearing Installer, PIN 319931Keep the lettered side of the bearing against the tool1sl1gl 9Using OMC Seal Installer, PIN 326554, install two new El driveshaft seals back to back as follows: Apply OMC Gasket Sealing Compound to the metal casing of the seals before installing Install the inner seal Q) with lip of the seal facing toward the gearcaseInstall the outer seal with lip of the seal facing away from the gearcase Apply OMC Triple-Guard grease to the seal lips after installing10Coat the shift rod a-ring with OMC Triple-Guard grease and install in shift rod bushing