1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 224Get this manual
r;J 4Lightly coat the exterior of the impeller cup wi.th OMC Gasket Sealing CompoundPosition the impeller cup in the impeller housing as shown 715Lightly coat the impeller cup with oilWith counterclockwise rotation install the impeller
6Apply thin bead of OMC Adhesive Mto the machined surface, on the top of the gearcase that contacts the impeller plateSlide the plate down over the driveshaft and position it7Apply OMC Needle Bearing Assembly Grease to the impeller drive pin and position in on the flat of the driveshaft8Apply thin bead of OMC Adhesive to the impeller housing mounting surface9Slide the impeller housing into position while rotating the