1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 214Get this manual
Assembly r:;] 1ol 1If any of the swivel bracket components were removed,
l2.J t!J refer to the two reference pictures for correct reassembly
2If removed, install the steering bracket to the pivot tube with the three screws Tighten the screws to torque of 96-120 inIbs(11-14 Nm)f311gl 3Assemble the friction block and linerLubricate and place the liner and friction block in the swivel bracket32473
[!] 4Install the upper thrust washer on the swivel bracket5Apply OMC Triple-Guard grease to the lower bushingInstall the lower bushingO-ringand lower thrust washer 6Apply OMC Triple-Guard grease to the pivot tubeInstall the pivot tube and steering bracket into the swivel bracket7Thread the swivel bracket adjustment screw with spring into the swivel bracket to retain the steering bracket