1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 208Get this manual
13Remove the lower thrust mount and shift rod grommet 14Refer to Cleaning and Inspection at the beginning of this sectionAssembly and Installation
1Install the lower thrust mountand shift rod grommet to the exhaust housing
1nl 2Apply GE RTV adhesive and install the two upper mountsOMC Nut Lock to the four upper mount retaining screws and torque to 60-84 inIbs(7-9 Nm)
71 3Place the upper thrust mount and plate in position on the
swivel bracket assemblyf61 4Clean all sealant from the threads on the two upper mount to steering bracket screwsApply OMC Nut Lock to threads of screwsPosition the swivel bracket assembly on the exhaust housingInstall the two upper mount screws and tighten to torque of 96-120 inIbs(11-14 Nm)Install caps with new O-rings and torque screws to 60-84 inIbs(7-9 Nm)r,Q1 5Place the lateral mounts in the lower mount bracketsOMC Nut Lock to threads of lower mount bracket screwsInstall the lower mount bracketsTighten screws to torque of 60-84 in Ibs(7-9 Nm)6Position new idle relief muffler gasketInstall the muffler the exhaust housingApply OMC Nut Lockto the muffler's reta ining screw threadsTighten the screws to torque of 48-60 inIbs(5-7 Nm)