1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 204Get this manual
14 6Install the throttle control plate on outer handlef151 7Place the throttle end cap into inner handleThe tab on the cap goes into the recess of the inner handlef161 8Push the throttle cable pin through the end of the throttle cabler:J7l 9Lubricate end of the pin, guides, rollers, helix grooves, and inner handle guide slot with OMC Moly LubePlace the guides over the roller pin and into the slots of the inner handlePlace the rollers on the ends of the roller pinr:J7l f181 10Assemble the helix halves on the handle and slide the grip over the helixBe sure the twist-grip's speed indicator line is positioned with the speed range symbol on the handleSnap the grip into place f181 11Turn the idle speed adjustment knob counterclockwise to