1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 198Get this manual
Inl 3Place the throttle cable into the inner handle and align the handle
l!I cover with the handleInstall the throttle control plate on outer
f10l 4Place the throttle end cap into inner handleThe tab on the
cap goes into the recess of the inner handlecable
G1l 5Push the throttle cable pin through the end of the throttle
r:J2l 6Lubricate end of the pin, guides, rollers, helix grooves, and
inner handle guide slot with OMC Moly LubePlace the guides over the roller pin and into the slots of the inner handlePlace the rollers on the ends of the roller pingrip over the helixBe sure the twist-grip's speed indicator line is positioned with the speed range symbol on the handleSnap the grip into placethe minimum slow speed position