1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 183Get this manual
rJ 11Rotate the propeller shaft and shift the engine into REVERSEPlace the actuator cam link into the shift actuator cam Secure the link with the washer and pinf8112Seat shift lever socket on the leverSnap socket onto the studSecure the socket with washer and cotter pin 19l13Connect the overboard water indicator hose tothefitting
on the exhaust coverSecure the hose in the J-clampr:JOl14Connect the fuel hose to the fuel pump with new tie strap
[!TI 15Install the throttle control leverr:;:;J 16Slide the throttle control rod through the nylon block on the throttle control leverInsert the pin CD in the end of the rodOffset on nylon block must face forward f.i2l17Place the nylon bushing on the stud of the throttle control leverEngage the armature plate link Q) on the studPlace the washer over the stud and engage the spring