1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 130Get this manual
13 DR4622
Ohmmeter Test
INotel All ohmmeter tests must be performed with the engine NOT running1Calibrate ohmmeter on appropriate scale2Insert jumper wires in ignition plate connector, terminals "B" and "C"3Calibrate ohmmeter on appropriate scaleConnect between jumpers Meter must show 40 10 ohms
1141 4To test
a grounded condition, connect ohmmeter alternately between each jumper and clean engine ground Any needle movement indicates sensor coil or leads are grounded Locate and repair ground, or replace sensor coil