1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 109Get this manual
Ignition Coil Tests A wide variety of ignition testers are available from various manufacturersIn addition, some automotive testers having the proper specifications can be usedDetailed instructions for the use of any tester are provided with the unit; therefore, only general information is given hereRefer to the manual of the ignition tester you are using for coil specificationsSpecifications will vary among testersIgnition coil must be removed from powerhead for power and leakage testingill perform all tests to the coil on wooden or insulated bench
topSpecifications
Primary Resistance Secondary Resistance Operating Amps (Max)
Merc-O- Tronic
To avoid possible shock hazards and to prevent leakage,
Analyzer Polarity
Magneto C.DCoil PIN 582508 0.1 0.05.n 275 50.n
1.5 amps Normal
Stevens
PCE0043
Ohmmeter Test Resistance tests can be performed while the ignition coil is still mounted to the powerhead1Twist and remove the spark plug and primary leads from the ignition coil