1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 76Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 76

Carburetor Body
1Check all drillings and passages with syringe filled with isopropyl alcohol
2Visually inspect all gasket surfaces for nicks or irregularities3Check for excessive throttle shaft playCheck for throttle valve misalignment4If necessary, remove the calibration pocket core plug to inspect the pocket for damage or restrictions: []] Drive small punch not more than through plug and pry out18

Install new core plug with the convex side upSeat the plug using flat end punch and plastic malletApply Gasoila sealer to the rim of the core plug after it is seated5If necessary, remove the lead shot to inspect passage for restrictions or leaks:

Back to 1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146