1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 293Get this manual
rJl1sl5Remove the four screws that retain the lower motor coversRemove the starboard coverIglSDisconnect the three bullet connectors, and remove the port 7Raise the unit and lock it in place with the mooring bracketf1Ol8Disconnect the bullet connector and two-pin connector for trim senderPull the wires with braided tube through the stern bracketr:J1l9Remove the ground wire from motor retaining screw using No.3 Pozi-Driv tool10Remove external snap rings from the upper pin [!!] 11Use punch to remove the upper pin12Loosen the manual release valve, and retract the tilt cylinder rod