1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 255Get this manual

1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 255

Installation 1Apply OMC Locquic Primer and OMC Nut Lockto the threads of the two top starter mounting screws 1251

2Position the starter and install the mounting screwsTorque to 14-16 ftIbs(19-22 Nm)
12611271 1281

3Attach ground wire and yellowred wire from neutral start switch to small posts on the bottom of the solenoidTighten nuts securely4Attach red rectifierregulator, engine cable, and power trim cable wires to large solenoid postTighten nut securely5Apply OMC Locquic Primer and OMC Nut Lockto the threads of the negative battery cablebottom starter retaining screw
1291 6Attach power trim and 1251

Back to 1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151