1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 211Get this manual
28Install new seal in the bearing housing using OMCSeal Installer, PIN 341439Apply oil to the casing of the seal before installingInstall the seal with exposed lip facing away from the bearing housingPress the seal into the housing until the tool seats
1421 1431
29Apply OMC Triple-Guard grease to the seal lips after installing
30Apply OMC Needle Bearing Assembly Grease to the thrust bearing Position bearing around shoulder on the propeller shaft31Apply OMC Needle Bearing Assembly Grease to the thrust washer Place washer in recess of bearing housing32Coat bearing surfaces of propeller shaft with gearcase oilSlide the propeller housing on the propeller shaft