1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 207Get this manual
aID 21 Remove the pinion bearing only if it needs to be replacedBefore attempting removal, take out the bearing retaining ring on top side of the pinion bearing using long-handle needle-nose pliers such as Snap-On No911 CP or equivalent
If the pinion bearing must be replaced, use OMC Bearing Remover and Installer, PIN 391257, and assemble it as follows:
[!ID Flange Nut, PIN 326586
CD Plate, PIN
391260 Q) Rod, PIN 326582 Remover, PIN 326579
INote Make sure all loose needles are inside bearing case before
pulling bearingThe needles will provide surface for the remover tool to pull against3 4