1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 202Get this manual
COA3139
rn 2Apply OMC Adhesive Position twotonew seals exhaust sealant the lower housing seals' inner surfaceson the
housingApply OMC Triple-Guard grease to the seals' outer surfaces and position the housing on the gearcase3Rotate the propeller shaft and shift the gearcase to FORWARDSlide the gearcase into place, making sure the driveshaft engages the crankshaft, the water tube enters the water pump, and the lower inner exhaust housing does not slip out of position4Apply OMC Gasket Sealing Compound to threads of the gearcase retaining screwsInstall the screws and tighten to the following torques:
COA3663
inscrews inscrews 264-288 inIbs(30-33 Nm) 30-32 ftIbs(41-43 Nm)