1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 174Get this manual
25 '" 1OInstall the starboard locknutReplace locknut if definite resistance is not felt25 '" 11Torque starboard tilt tube nut to 50-54 ftIbs(68-73 Nm), then loosen nut Va to 1f4 turn26 12Install the tilt cam and collar on the tilt tube27 13Install the steering shaft and thrust washer28 14Install the steering shaft keeperApply OMC Locquic Primer and OMC Nut Lock to the splines of the steering shaft and lower mount bracket29 15Install the lower mount bracket and new locking nut with its unstaked side facing the mount bracketAlign the bracket with the steering arm and torque the nut to 190-210 ftIbs(258-285 Nm)16Fill the swivel bracket with OMC Triple-Guard grease through the grease fitting on the bracket's port sideLubricate the tilt tube, swivel bracket, and stern brackets through the forward grease fittings17Install the exhaust housing as described in this section E u