1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 150Get this manual
1231124131Secure restraining jaw "e" and forcing jaw "D" to frame
32Tighten the rod cap screws to torque of 25-30 inIbs(2-3 Nm)
33Apply light coat of outboard lubricant to the corners of the connecting rod and rod capPlace frame on connecting rod using the following procedure:
1261 1271
Position frame onto the connecting rod so the contact area of the jaw is centered in the side of the rod
Tighten forcing screw until jaws contact connecting rod Slide frame down until adjustment stop contacts the connecting rodThe groove lines on the jaws must be centered on the rodcrankpin diameter
1 The above procedure must be followed to assure frame is Note