1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 147Get this manual
[]] 7Lubricate new lower housing a-ring with OMC TripleGuard grease and place the a-ring on the lower housing []] 8Lubricate seal lip with OMC Triple-Guard grease and place lower bearing seal housing on crankshaft[1] 9It is very important to notice that there are port and starboard pistons in this engineAll pistons are also marked "exhaust side" Using these marks, orient the pistons with the correct cylinders and mark the bottom wrist pin hole with an indelible marker[[] 10It is very important to notice that the connecting rods have top and bottom diagonal oil hole will always face the flywheel
rn 11 Apply OMC Needle Bearing Greasepin the 28 Align the to wrist pin borebearingsInstall the bearings in the wrist