1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 139Get this manual
[]] 7Disconnect three trimtilt switch harness bullet connectorsRemove port cover[[] 8Disconnect two tilt limit switch bluewhite lead bullet connectors [!Q]
9Disconnect trim sender lead bullet connector, and two-pin connector10Remove pin and disconnect shift rod
11Remove screws retaining powerhead to exhaust housing and steering arm bracket
12Attach snap hooks and chain to powerheadThe chain must be minimum length of 36 in(914 mm)The snap hooks must be capable of lifting 500 pounds (227 kg)Hooks must not bind in cylinder block lifting eyes