1995 Johnson Evinrude "EO" 60 LV 90, 115, 150, 150C, 175 Service Manual, P/N 503151, Page 100Get this manual
[] 8Lift the flywheel cover and tap the throttle shaft out of the throttle arm[] 9Remove the roller arm shaft and throttle shaft retainersLift the flywheel cover from the powerhead []J
10Remove the flywheel cover
[]] 11Using Snap-on A-144 fixture, or equivalent, remove the flywheel retaining screwsDiscard the screws
12Using the two 3s-24x1 inscrews from OMC Flywheel Service Kit, PIN 434649, secure the tool to the flywheelTwo ofthe holes in the flywheel are tapped for the toolTurn the center screw and draw the flywheel off the crankshaft
INote To avoid damaging the flywheel
Installation
magnets, OMC Flywheel Service Kit, PIN 434649, should be your only method of removing and installing the flywheel