1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 266Get this manual
COA1365
f171 8Bend the inside loop of the rewind spring in toward the center of the starter housingEngage the slot of the pulley with the inner loop of the rewind spring, and install the pulley in the starter housing
r:t8l r,gl 9Place the friction plate spring washer
between the two friction plates on the pulley hubSecure the friction plate and friction plate spring washer with the pulley lock ring COA1376
r,gl 10Be sure the starter pawl bushing is installed in the pulleyApply OMC Triple-Guard grease or Lubriplate 777 to boss of the starter pawlPlace spring washer on the boss of the starter pawlPlace the starter pawl in the pulleyr,gl 11housingthe starter housing spring
in the starter
1201 12Install the starter pawl plate return spring onthestarter