1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 255Get this manual
Assembly 1,l 1If the reverse gate was removed during disassembly, install reverse gatebushings ,and shafts to jet housingPosition shafts so holes align with holes where retaining screws make contact2Torque screws to 60-84 inIbs(7-9 Nm)After installation, check to make sure the reverse gate moves freely tJ assemble in any other position
f21 3Place roller into cam in position shown The roller will not
fJl 4Place cam roller on reverse gate stud, and torque nut to 60-84 inIbs(7-9 Nm)5Install bushing
, eccentric