1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 240Get this manual
Assembly Before beginning assembly procedures, all gearcase components must be thoroughly cleaned and in serviceable condition Refer to Cleaning and Inspection, Page 6-5 A-
1421 Assemble the following components of OMCPinion Bearing Remover and Installer, PI 391257, as shown:
-20 '2 inHex Head Screw PIN 326584 Spacer in0.0Flat Washer
PIN 326582 Rod PIN 326575 Installer -20 inHex Head Screw PIN 391260 Plate
2Place the bearing on the installer tool with the lettered side of the bearing facing the toolUse OMC Needle Bearing Assembly Grease to hold the bearing onto the tool3Insert the tool with the bearing into the gearcaseDrive the bearing into the gearcase until the washer on the tool contacts the spacer
1431 4Remove the toolPosition new a-ring CD on the pinion