1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 186Get this manual

1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 186

rw 8Usingthea inner handlemallet, steering handle.steel pin that punch and drive out the retains in the f161 9Remove the plastic inner handle from the metal outer handle by driving the outer handle off with mallet and punchInner handle is bonded to the outer handleAfter removing, chip away remnants of inner handle
10Remove the throttle cable seal from the inner handleInspection

1Remove protective sleeves and inspect the throttle cable and terminal wires for kinks and wearReplace if necessary2Inspect the steering handle components for wear, cracks, or damageReplace parts if necessaryPut protective sleeves on throttle cable and terminal wires