1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 129Get this manual
Ignition Coil ReplacementAll Models Removal
1Twist and remove cover to remove the spark plug and primary leads from the ignition coils
rv any screwsfastener and washer orientation before removing 2Notice the L!J
3Remove the screws, coil, and washersInstallation
L!J ignition coil on the powerheadInstall and tighten the retaining screws to torque of 48-96 inIbs(5,4-10,8 Nm)2Apply light coating of OMC Triple-Guard grease to the ribbed portion of the spark plug ceramics and to the openings of each of the spark plug lead coversInstall the spark plug leads3Apply light coating of OMC Triple-Guard grease to the opening of each primary lead cover and install the coversObserve proper wire routing and ignition timingOrangeblue primary lead must be connected to the No.1 ignition coil