1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 77Get this manual
Electric Primer '
141 1To test the solenoid windings, calibrate an l
Meter should indicate 5.5 1.5 ohms2To test solenoid valve and seat:
mmeter on low ohms scale and connect between the purple white and black leads
Lightly pressurize inlet fitting with alco 01 and syringe With lever in run positionno fluid ould enter inlet fitting With lever in prime positionfluid both outlet fittingshould come out
rJl 3To inspect or replace internal components, remove the four solenoid cover screwsf8l 4When assembling solenoid, back out screw in their holes to engage original threadsthen, tighten securelyInstallation