1994 Johnson/Evinrude Electric outboards Service Manual, Page 95Get this manual
Installation
1Clean the threaded area of the motor tube using OMC Cleaning Solvent
2Install motor tube seal sive sealant to top of seal
into adapterApply RTV adhe-
3Spray OMC All-Purpose Marine Cleaner on the motor tube wires to provide lubrication 4Insert the wires into the motor tube5Temporarily attach motor to adapter[] 6Apply OMC Ultra Lock to the threads of the motor tube7Tighten adapter on motor tube[] 8Align adapter set screw hole with existing dent in motor tube to set approximate motor alignment9Set motor offset using the procedure on Page 4-10