1994 Johnson/Evinrude Electric outboards Service Manual, Page 73Get this manual
1251 14Apply OMC Triple-Guard grease to washer and pivot postPlace washer on post
1261 15Line up index mark on steering gear with index mark
on pinion flangeEngage steering gear teeth with pinion and slide steering gear down on pivot postPosition steering cable and install set screw
127 16Apply OMC Screw Lock to steering cable set screw17Turn motor to straight-ahead position, and connect electrical wires as shown on Page 3-23Wires must be connected with the motor at the straight-ahead position so they will not be pulled tight and damaged when motor is turned 1800 in either direction128 18Install steering housing coverWhen correctly indexed,