1994 Johnson/Evinrude Electric outboards Service Manual, Page 53Get this manual
Continuity TestNegative Circuit, Foot Control, Except HBF2
INote To avoid damaging components or troubleshooting equipment, disconnect the battery cables before proceeding1Use an ohmmeter calibrated on high ohms scale or continuity light to test continuity2Connect one meter lead to BLACK battery cableLeave this meter lead connected for all the following tests
3Connect second meter lead to BLACK 14-Galead at foot pedal terminal strip: The meter must show continuity If meter shows no continuity, repair or replace battery cables
[]] 4Remove the steering housing cover