1994 Johnson/Evinrude Electric outboards Service Manual, Page 49Get this manual
Continuity TestPositive Circuit, 24 Volt Foot Control INotel To avoid damaging components or troubleshooting equipment, disconnect the battery cables before proceeding1Use an ohmmeter calibrated on high ohms scale or continuity light to test continuity2Move 1224 Volt switch to "24 V" position3Connect one meter lead to RED battery cable rn 4.Volt switch: meter lead to RED 12-Gabattery cable at Connect second 1224
The meter must show continuity If meter shows no continuity, repair connection or replace battery cable5Move 1224 Volt switch to "12 V" position6Move first meter lead to WHITE battery cable
rn 7Connect second meter lead to WHITE 12-Gabattery cable at 1224 Volt switch:
The meter must show continuity If meter shows no continuity in either test, repair or replace battery cable