1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 324Get this manual
67 COA2478 COA2480
r;;;;l44Using OMCTrim Cylinder End Cap Remover, PIN 324958,
and breaker bar, remove both of the trim cylinder end caps
166145Remove the outside seals from the trim cylinder end caps
There is an a-ring and back-up ringone of two different designsNewer nylon seals will be continuous ring of nylonOlder seals are splitr;::;] 46Using smooth flat tool, remove the scraper from the trim end capPry the scraper out of the groove in the end capDiscard the scrapers
168147Using the same smooth flat tool, remove the -ring from
the end capsDiscard the a-ringsClean both end caps and scrape all corrosion or loose paint from the threads in the outside a-ring areaThe one pictured on the left is an a-ring The one pictured on the right is quad-ring The quad-ring is used for serviceend capsOil and install new scraper To aid in the installation of the scraper, warm the scraper in hot water