1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 320Get this manual
1341 16With the tilt cylinder secured in soft-jaw vise, slide the band over the cylinderOil and install the O-ring on the band nutInstall the band nut nut loosely
into the cylinderInstall the band
not engage the threads of the capSet the assembly aside at this time
1351 17Slide the piston and rod assembly into the cylinder but do
1361 18Remove the three oil reservoir retaining screws with
washersRemove the oil reservoir from the manifold
1371 19Clean and inspect the oil reservoir, retaining screws,
washers, and O-ring Replace any components, if necessaryreservoir filter Q)