1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 294Get this manual
o o 33755 22987 22986
126 16With cylinder body in vise, unscrew trim cylinder end
caps using OMC Trim Cylinder End Cap RemoverInstaller, PI 436710 or OMCUniversal Spanner Wrench, PIN 912084, and breaker barYou will have to use smaller pins in spanner wrenchRemove both trim pistons, rods, and end caps
1271 17Inspect both bores of trim cylinders for excessive scoring1281 18Remove back-up rings and a-ring from each trim piston1291 19Using OMCRod Holder, PIN 983213, clamp rod tightly in
a viseRemove wear plate from trim rod and remove end capRemove from viseUsing screwdriver, carefully pry the scraper out ofathe enda cap and discard!] 1321 bRemove the inner quad-ring with suitable tool, and remove the outer a-ring Discard quad-ring and a-ring