1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 249Get this manual
Description of Charging System The outboard charging system consists of battery, flywheel, an alternator stator, rectifier, and on some models, rectifier regulator which provides full wave regulation of the systemThe engine's battery can affect the charging system operation The battery should be of heavy-duty marine construction, should be the correct capacity for the application, and should be in good condition with normal charge
rv The engine'sprovide thecontains the power the stator windingsflywheel permanently charged magnets which energy to
The magnets must be at their original design strength for full alternator outputr:;l The alternator stator consists of many windings of wire wrapped around metal laminationsThe stator is attached to the upper crankcase headThe flywheel's magnetic lines of force cutting through the stator windings produce alternating currentThe stator or its leads could be damaged, which could result in reduced or no alternator outputr:;l The rectifier on the 88 MSL model consists of series of diodes, built into metal case, which changes the stator's alternating current to the direct current used to charge the batteryOne, several, or all of the rectifier diodes might become damaged, resulting in system grounded condition, no charge condition, or an incorrect charging rate