1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 224Get this manual
Assembly f1l 1If the reverse gate was removed during disassembly, install reverse gatebushingsand shafts to jet housing Position shafts so holes align with holes where retaining screws make contact rv tion, checkscrews sure the reverse (7-9 Nm)After installa2Torque to 60-84 inIbsto make gate moves freelyf21 3Place roller into cam in position shown The roller will not assemble in any other position4Place cam roller on reverse gate stud, and torque nut to 60-84 inIbs(7-9 Nm)5Install bushing