1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 169Get this manual
Exhaust Housing Servicing Removal If equipped with power trim and tilt, refer to Section for removal instructions1Remove the powerhead as described in Section 42Remove the gearcase as described in Section 6
exhaust housing while in the down position could allow sudden release of parts which could cause serious injuryPlace motor in tilt position to relieve pressuref11 3Remove two lower engine cover rear rubber mount screwsretaining lower engine cover to exhaust housing adapterLift and turn lower engine cover assembly to free cover from adapter4Remove four lower mount to bracket screws