1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 153Get this manual
141j58If the overboard water indicator fitting has been removed
from the exhaust manifold cover, apply OMC Gel-Seal I to threads of the fitting before installing
r;:;l r:;J 59Apply OMC Gasket Sealing Compound to new bypass cover gaskets and place the gaskets onto the cylinder blockInstall the bypass coversTighten the screws to torque of 50-84 inIbs(5,7-9 Nm)60Service the leaf valve assemblies as described in Section 2Install the intake manifold using new gasket61Assemble the carburetion, ignition and electrical components to the powerhead