1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 134Get this manual
1 832058
[!] Installation
r:;] 1Insert the grommets into the valve body Place the relief valves in the grommets with short side (spring end) of the valve facing out
f312Insert new gaskets Q) and thermostats CD into the valve bodyGaskets must be between valve body and thermostat3Apply OMC Gasket Sealing Compound to both sides of new valve body to cover gasket and position gasket on the cover f414Apply OMC Gasket Sealing Compound to both sides of new valve body to adapter gasket and position gasket on the adapter 5Insert the two relief valve springs 6Place the cover on the valve body7Align the springs with the relief valve and assemble the cover and valve body assembly to the adapter8Apply OMC Nut Lock to threads of screws Install screws and tighten to torque of 60-84 inIbs(7-9 Nm)