1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 118Get this manual
6 DR4098
STEPCHARGE COIL TESTS
Ground Test
1Disconnect 2-pin Amphenol connector between the stator and power pack2Set peak-reading voltmeter to "POS" and "500"1sl 3Alternately, connect voltmeter between stator connector terminals "A", "8", and clean engine groundCrank engine and observe meter at each connection Any reading on either test indicates charge coil is grounded Locate and repair ground, or replace stator assembly4If no reading is indicated in Step 3, go to Output TestOutput Test