1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 75Get this manual
Inspection
1sl 1To test the solenoid windings, calibrate an ohmmeter on low ohms scale and connect between the purplewhite and black leads Meter should indicate 5.5 1.5 ohms2To test solenoid valve and seat: Lightly pressurize inlet fitting with alcohol and syringe With lever in run position fitting
, no fluid should enter inlet
With lever in prime position both outlet fittings
should come out
1sl 3To inspect or replace internal components, remove the four solenoid cover screws