1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 283Get this manual
Assembly
Wear safety glasses while disassembling and assembling manual starters because of rewind spring tension
f71 1Using OMCStarter Spring Winder and Installer PI 392093, clamp spring winder base CD in viseInsert adapter release plate j) into spring winder base
19l 2Apply OMC Triple-Guard grease or Lubriplate 777 to the rewind spring Place inner loop of rewind spring in the spring winder baseInsert the pin of the crank and pin assembly into the inner loop of the rewind springSecure the crank and pin assembly to the starter winder base with the crank retainer screw19l 3Rotate the crank and pin assembly in the direction shown on the toolWind the spring into the starter winder base until end of rewind spring contacts the starter winder base