1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 242Get this manual
r:-;-:] Inspect bearings for damage while in placeIf bearing is
damaged, remove and discard.lfthe bearing is removed for any reason, it must be replacedf171 20Using OMC Bearing Remover, PIN 319880, and mallet, remove the two pinion bearingsDiscard the bearings'18l 21 Remove the propeller shaft bearing housing O-ring Discard the O-ringf191 22Using OMC Puller Bridge, PIN 432127, and OMC Small Puller Jaws, PIN 432131, remove the two propeller shaft sealsDiscard the sealsr:;;l 23Using OMC Bearing Remover, PIN 319880, and mallet, remove the smaller propeller shaft bearing located in the aft end of the bearing housing Discard the bearing24Using OMCPulier Bridge, PIN 432127, and OMCBearing Puller, PIN 432130, remove the larger propeller shaft bearing located in the front of the bearing housingDiscard the bearing