1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 241Get this manual
16Remove the shift rod bushing as follows: Position OMC Shift Rod Bushing Remover, PIN 327693, under the shift rod bushing Thread the adapter of the Universal Slide Hammer, PIN 391008, in the slide hammerPlace the adapter through the shift rod bushing and thread into the remover tool Remove the handle from the remover toolThen remove the bushing from the gearcase Once the bushing has been removed from the gearcase, examine the bushing for damageIf damaged, replace the bushing on reassemblyRemove and discard the a-ring from the bushing13
r:;-;J 17Using OMC Puller Bridge, PIN 432127, and OMC Small Puller Jaws, PIN 432131, remove the two driveshaft sealsDiscard the seals