1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 212Get this manual
10 1sl 8Using punch and mallet, drive the steel pin that retains the inner handle from the steering handleINotel Do not remove the inner handle except to replace it
Remove the plastic inner handle from the metal outer handle by driving the outer handle off with mallet and punchInner handle is bonded to the outer handleAfter removing, chip away remnants of inner handle10Remove the throttle cable seal from the inner handleInspection
1Inspect the throttle cable for kinks and wearReplace if necessary2Inspect the steering handle components for wear, cracks, or damageReplace parts if necessary3Refer to Ignition System, Section 3, to test stop switch Assembly