1994 Johnson/Evinrude "ER" 9.9 thru 30 outboards Service Manual, Page 177Get this manual
Disassembly To simplify reassembly and wiring installation, layout the various screws and clamps in the order of their proper location
1141 1To remove the water tube grommet, depress tab of the
grommetPush the grommet out of the inner exhaust hous-
f151 2Use OMC Grommet Installer, PIN 304148, to install new grommetApply OMC Gasket Sealing Compound to outside diameter of the grommetAlign tab of the grommet with hole in the housing and install grommetf16l 3Using diagonal or end cutters, gently pry out and remove the flywheel key