1994 Johnson/Evinrude "ER" 60 thru 70 outboards Service Manual, Page 326Get this manual
18 COA2503
r:J8l20Inspect the rubber keeperon the pump drive coupling eN)The rubber keeper provides cushion between the motor and file pumpIf the keeper is not present, there is chance that the tang on the pump coupling could be broken off when the motor is energized
L!!J position shownUsing the two Alren head cap screws and
21Install the pump coupling eN) in the oil pump in the
one hex head screw (p), flat washer, and lock washer, carefully and evenly draw the oiT pump down againstthe manifoldTighten the screws to torque of 25-30 inIbs(2,8-3,4 Nm)The oil pump must be drawn down evenly
120122Snap the pump filter screen into the manifold as shown
the pump is mounted, up to the top of the filter
l3J is levelUsing the correct hydraulic fluid, fill the cavity where