1994 Johnson/Evinrude "ER" 60 thru 70 outboards Service Manual, Page 295Get this manual
Installation
rv grease totrimtilt unitpin, and install Apply OMC Triple-Guard 1Place into positionthe lower the pini ftIbs(68-73 Nm), then loosen one nut by '8 to 14 turn'" 2If loosened, tighten the tilt tube nut to torque of 50-54 f213: Instal.1 external snap rings on lower pin with sharp edge of nng facing out4Extend tilt cylinder rod to match with holes in swivel bracket5Apply OMC Triple-Guard grease to upper pin, and install the pin