1994 Johnson/Evinrude "ER" 60 thru 70 outboards Service Manual, Page 228Get this manual
r:J7l8Bend the inside loop of the rewind spring in toward the center of the starter housingEngage the slot of the pulley with the inner loop of the rewind spring and install the pulley in the starter housing f.i8l11919Place the friction plate spring washer between the
two friction plates on the pulley hubSecure the friction plate and friction plate spring washer with the pulley lock ring Apply OMC Triple-Guard Grease or Lubriplate 777 to boss of the starter pawlPlace spring washer on the boss of the starter pawlPlace the starter pawl in the pulleythe starter housing spring in the starter
1910Be sure the starter pawl bushing is installed in the pulley
1201 12Install the starter pawl plate return spring on the starter
pawl plate CDPress the other end of spring on the boss of the pulleyPosition the starter pawl plate on the pulley