1994 Johnson/Evinrude "ER" 60 thru 70 outboards Service Manual, Page 217Get this manual
15Move shift rod from side-to-side while pushing on the propeller shaft to ensure proper alignment of the bearing housing locator pin into the locator pin hole in the gearcaseGently tap the end of the propeller shaft with plastic or rawhide mallet to fully seat the bearing housingr;;;l 16Apply OMC Gasket Sealing Compound to the threads of the shift rod cover screwsInstall the screwsTighten the screws to torque of 60-84 inIbs(7-9 Nm) 1561 shim(s) (selected earlier)thrust bearingwasherand 17Position the driveshaft on the driveshaftINotel Position items' and
exactly in order shown
15711581 gearcase area that contacts mountmg flange of the 18Lightly apply OMC Gasket Compound to the