1994 Johnson/Evinrude "ER" 60 thru 70 outboards Service Manual, Page 189Get this manual
1191 6Route the trim sender wires through the braided tube and install the sender unit in the port stern bracket
1201 7Install the upper and lower steering shaft bushings f211
and new seals in the swivel bracketBoth seal lips face out Coat the seals' outside surface with OMC Gasket Sealing Compound Coat the bushings and seal lips with OMC Triple-Guard grease30761
12218Coat tilt tube bushings with OMC Triple-Guard grease and,